Puller-Tensioners
Puller-Tensioners
SA-ZY-4X40 Hydraulic Tensioner
Self-propelled four-drum hydraulic tensioner for four-split conductor bundles, offered in 500mm² (SA-ZY-4X40) and 1000mm² (SA-ZY-4X60) cross-section capacities.
PriceOn request
Features
- SA-ZY-4X40: mainly used for tension and deployment of four-split conductors with a cross-section of 500mm² and below
- SA-ZY-4X60: mainly used for tension and deployment of conductors with a cross-section of 1000mm² and below
- Optional features available: digital control, centralized control, IoT transmission function, remote diagnosis system
Models
| Category | Spec | SA-ZY-4X40 | SA-ZY-4X60 |
|---|---|---|---|
| Performance | Max intermittent tension force | 4×50kN or 2×100kN | 4×70kN or 2×140kN |
| Performance | Max continuous tension force | 4×40kN or 2×80kN | 4×60kN or 2×120kN |
| Performance | Corresponding speed | 2.5km/h | 2.5km/h |
| Performance | Max continuous pay-off speed | 5km/h | 5km/h |
| Performance | Corresponding tension force | 4×20kN or 2×40kN | 4×30kN or 2×60kN |
| Performance | Max counter-pulling force | 35kN | 60kN |
| Performance | Max continuous pulling speed | 3km/h | 3km/h |
| Structure | Tension wheel diameter | 1500mm | 1700mm |
| Structure | Applicable max wire diameter | 40mm | 45mm |
| Structure | Electrical system | 24V | 24V |
| Structure | Hydraulic power output | Can connect to hydraulic wire tail car | Can connect to hydraulic wire tail car |
| Structure | Vehicle weight | 11550kg | 13400kg |
| Structure | Overall dimensions (L x W x H) | 6710×2300×2650mm | 6790×2300×2900mm |
| Main Configuration | Engine | Cummins/Weichai | Cummins/Weichai |
| Main Configuration | Main hydraulic pump | Rexroth/Linde | Rexroth/Linde |
| Main Configuration | Hydraulic motor | Rexroth | Rexroth |
| Main Configuration | Reducer | RR/Rexroth | RR/Rexroth |
More hydraulic pullers & tensioners
Puller-Tensioners
Puller-Tensioners
